Brief introduction of SLA single stage vertical double suction centrifugal pump
SLA type vertical single-stage double suction centrifugal pump, vertical single stage double suction casing in the vertical double suction centrifugal pump, and other liquid conveying solid particles of water or the physical and chemical properties similar to water, the temperature of the medium is transported to 0 to 80 DEG C and to adapt to industrial city drainage pump, pump can be used as a factory, city, power plant, water conservancy and other drainage or water supply, can also be used for farmland irrigation. Allow inlet pressure 0.6MPa.
Parameter range (design point) of SLA single stage vertical double suction centrifugal pump
The flow rate is Q 200 to 3770m3/h
Lift H 13.5 to 142m
Model SLA single stage vertical double suction centrifugal pump model specification
10SLA-9
10 - the suction bore is divided by 25 (that is, the inlet diameter is 250mm)
SLA vertical single stage double suction axial medium opening direct centrifugal pump
9 - than the number is 10 in addition to a whole
Structural description of SLA single stage vertical double suction centrifugal pump:
The pump is vertical and the suction port and outlet are in horizontal direction. The separating surface of the pump body and the pump cover is vertically separated from the shaft central line, and the pump cover can be opened and the rotor parts can be removed without taking into consideration the water inlet, the water outlet pipe and the motor. The upper bearing of the pump adopts a rolling bearing, grease lubrication, and a cooling cavity is arranged on the bearing body. The lower bearing of the pump is a guide bearing, which is lubricated and cooled by the water of the pump itself.
Shaft seal adopts soft packing seal and mechanical seal in two forms.
Direction of rotation of SLA single stage vertical double suction centrifugal pump
From the motor end to the pump, the pump is counterclockwise rotation, that is, the pump facing the pump cover surface, right for the inlet, left for the outlet.
Material of main parts of SLA single stage vertical double suction centrifugal pump:
The SLA type vertical pump is made of cast iron, the guide bearing is tin bronze, and the axle is Steel No. 45.
SLA single stage vertical double suction centrifugal pump complete range:
Complete sets of pumps, motors, pumps, bearings, couplings and motor support.